No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Building an Enterprise Network

Building an Enterprise Network

As shown in Figure 1-8, an enterprise needs to build a network to provide access to various terminals, including IP phones, PCs, network printers, and servers.

Figure 1-8  Using Ethernet technology to build an enterprise network

Ethernet technology can connect various terminals to a network to allow employees to surf on the Internet, make IP calls, access shared resources on servers, and print files using remote printers over the network. The IT administrators of the enterprise can manage the network in a centralized manner.

Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 275265

Downloads: 421

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next