No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the STP/RSTP Mode

Configuring the STP/RSTP Mode

Context

A switching device supports three working modes: STP, RSTP, and MSTP. The default working mode is MSTP. Use the STP mode on a ring network running only STP, and use the RSTP mode on a ring network running only RSTP.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    stp mode { stp | rstp }

    The working mode of the switching device is set to STP or RSTP.

    By default, the working mode of a switching device is MSTP. MSTP is compatible with STP and RSTP.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 259692

Downloads: 408

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next