No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Shared-Link Protection on a Switch

Configuring Shared-Link Protection on a Switch

Context

Shared-link protection is used in scenarios where a switch is dual homed to a network.

If a shared link fails, shared-link protection forcibly changes the working mode of a local switch to RSTP. This function can be used together with root protection to avoid network loops.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    stp process process-id

    The MSTP process view is displayed.

    NOTE:

    Skip this step if you perform configurations in the MSTP process 0.

  3. Run:

    stp link-share-protection

    Shared-link protection is enabled.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 254834

Downloads: 408

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next