No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MSTP Multi-Process

Configuring MSTP Multi-Process

On a network deployed with Layer 2 single-access rings and multi-access rings, configure multiple MSTP processes so that spanning trees of different processes are calculated independently and do not affect each other.

Pre-configuration Tasks

MSTP ensures that spanning trees in rings are calculated independently. After MSTP multi-process is enabled, each MSTP process can manage certain ports on a device. Each Layer 2 interface can be managed by multiple MSTP processes.

Before configuring MSTP multi-process, complete and activate the MST region configuration.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 269246

Downloads: 418

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next