Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MSTP Parameters on an Interface
Setting optimal values for MSTP parameters can help achieve rapid convergence.
- Setting the MSTP Network Diameter
- Setting the MSTP Timeout Interval
- Setting the Values of MSTP Timers
- Setting the Maximum Number of Connections in an Eth-Trunk that
Affects Spanning Tree Calculation
- Setting the Link Type of a Port
- Setting the Maximum Transmission Rate of an Interface
- Switching to the MSTP Mode
- Configuring a Port as an Edge Port and BPDU Filter Port
- Setting the Maximum Number of Hops in an MST Region
- Checking the Configuration