No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration
Checking the Configuration
Procedure
Run the display
sep segment { segment-id | all } command to check the configurations of SEP segments.
Run the display sep interface [ interface-type
interface-number | segmentsegment-id ] [ verbose ] command
to check information about interfaces that are added to a specified
SEP segment.
Run the display sep topology [ segmentsegment-id ] [ verbose ] command to check the topology status of a specified SEP segment.