No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Interface Management

This document describes the principles and configurations of interfaces and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Interface Attributes Are Affected After the Interface Auto-Negotiation Mode Is Changed?

What Interface Attributes Are Affected After the Interface Auto-Negotiation Mode Is Changed?

When the auto-negotiation mode of an interface is changed from auto-negotiation to non-auto-negotiation, the default interface rate and duplex mode are restored. For example, when a GE electrical interface works in auto-negotiation mode, the rate negotiated with the remote interface is 100 Mbit/s and the duplex mode is half-duplex. After the interface is configured to work in non-auto-negotiation mode, the interface rate is restored to 1000 Mbit/s and the duplex mode is full-duplex.

NOTE:
You should change the auto-negotiation mode on both the local and remote interfaces. Otherwise, the interfaces may be Down.
Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000142085

Views: 20976

Downloads: 69

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next