No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration


  • Run the display flow-wred-profile [ name flow-wred-profile-name | all ] command to check the flow queue WRED drop profile.
  • Run the display flow-queue-profile [ name flow-queue-profile-name | all ] command to check the flow queue profile.
  • Run the display flow-mapping-profile [ name flow-mapping-profile-name | all ] command to check the flow mapping profile.
  • Run the display traffic-applied [ interface [ interface-type interface-number ] | vlan [ vlan-id ] ] { inbound | outbound } [ verbose ] command to check the subscriber queue configuration.
Updated: 2019-12-28

Document ID: EDOC1000142089

Views: 50064

Downloads: 88

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next