No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Congestion Avoidance and Congestion Management

Licensing Requirements and Limitations for Congestion Avoidance and Congestion Management

Involved Network Elements

Other network elements are not required.

Licensing Requirements

Congestion management and congestion avoidance are basic features of a switch and are not under license control.

Version Requirements

Table 5-2 describes the products and versions supporting congestion management and congestion avoidance.

Table 5-2  Products and versions supporting congestion management and congestion avoidance

Product

Product Model

Software Version

S12700

S12708 and S12712

V200R005C00, V200R006C00, V200R007C00, V200R007C20, V200R008C00, V200R009C00, V200R010C00, V200R011C10

S12710

V200R010C00, V200R011C10

S12704

V200R008C00, V200R009C00, V200R010C00, V200R011C10

NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • The switch supports a maximum of 64 WRED drop profiles. A maximum of 16 WRED drop profiles that were configured first can be applied on the X series cards. A maximum of 64 WRED drop profiles can be applied on other cards.
  • The XGE interface connected to the ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, ET1D2FW00S02, or ACU2 card does not support setting the length of an interface queue.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142089

Views: 43316

Downloads: 87

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next