No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Application of Traffic Statistics

In Figure 8-1, different users on the enterprise campus network connect to the Internet through the switch and router. To analyze and evaluate traffic on the entire enterprise campus network, configure traffic statistics for different users separately.

Figure 8-1  Networking of traffic statistics

Service Deployment

  • Configure a traffic classifier based on MAC addresses to differentiate different types of data traffic.
  • Configure a traffic behavior and define traffic statistics in the traffic behavior.
  • Configure a traffic policy, bind the traffic classifier and traffic behavior to it, and apply the traffic policy to the inbound direction of the switch so that the device collects statistics on packets from different users.
Updated: 2019-08-21

Document ID: EDOC1000142089

Views: 43318

Downloads: 87

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next