No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applicable Scenario

Applicable Scenario

Networking Requirements

The enterprise campus network shown in Figure 3-5 provides voice, video, and data services (listed in descending order of priority). When different service flows of enterprise users arrive at the ISP network, devices on the ISP network must identify priorities of the services to provide differentiated services.

The precedence field in a packet depends on the network type. For example, packets on a Layer 2 network carry the 802.1p field and those on a Layer 3 network carry the DSCP field. When packets arrive at a device, the device maps packet priorities to CoS values and colors, and provides different QoS services according to the CoS values and colors. When packets leave the device, the device remarks the precedence fields of the packets based on the CoS values and colors. The downstream device can then provide differentiated services based on packet priorities.

Figure 3-5  Networking of priority mapping

Service Deployment
  • On SwitchA, configure a traffic policy in the inbound direction to re-mark voice, video, and data packets with different 802.1p priorities. Voice should be prioritized over, video, which should be prioritized over data.
  • Configure SwitchB to map 802.1p priorities of incoming packets to CoS values and colors. SwitchB then provides differentiated services based on the CoS values and colors.
  • Configure SwitchB to re-mark outgoing packets with DSCP priorities based on CoS values and colors. In this way, the service packets are provided differentiated services on the Layer 3 network based on DSCP priorities.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142089

Views: 43132

Downloads: 87

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next