No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Procedure

  • Run the display traffic classifier user-defined [ classifier-name ] command to check the traffic classifier configuration.
  • Run the display traffic behavior user-defined [ behavior-name ] command to check the traffic behavior configuration.
  • Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ] command to check the user-defined traffic policy configuration.

  • Run the display traffic-applied [ interface [ interface-type interface-number ] | vlan [ vlan-id ] ] { inbound | outbound } [ verbose ] command to check information about ACL-based simplified and MQC-based traffic policies applied to the system, a VLAN, or an interface.

    NOTE:

    Traffic policies can be applied to a sub-interface, but the display traffic-applied command cannot be used to check information about ACL-based simplified and MQC-based traffic policies applied to the sub-interface.

  • Run the display traffic policy { interface [ interface-type interface-number [.subinterface-number ] ] | vlan [ vlan-id ] | ssid-profile [ ssid-profile-name ] | global } [ inbound | outbound ] command to check the traffic policy configuration.

  • Run the display traffic-policy applied-record [ policy-name ] command to check the application record of a specified traffic policy.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142089

Views: 42536

Downloads: 87

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next