No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling a Smart Link Group

Enabling a Smart Link Group

Context

After a Smart Link group is enabled, the slave interface in the group is blocked. After the Smart Link group is disabled, the blocked slave interface is restored.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    smart-link group group-id

    The Smart Link group view is displayed.

  3. Run:

    smart-link enable

    The Smart Link group is enabled.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142090

Views: 88580

Downloads: 104

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next