No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an MD

Creating an MD

Context

IEEE Standard 802.1ag-2007 defines four formats for MDs:
  • no-md-name: The MAID field in outgoing CCMs does not carry the MD name.

  • dns-md-format-name: The MD information in the MAID of outgoing CCMs is a character string obtained from the DNS text.

  • mac-md-format-name: The MD information in the MAID of outgoing CCMs consists of 6-byte MAC address plus two-byte integer in the range of 0 to 65535.

  • string: The MD information in the MAID of outgoing CCMs is a character string.

Perform the following operations on the device where Ethernet CFM needs to be configured.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    cfm md md-name [ format { no-md-name | dns dns-md-format-name | mac-address mac-md-format-name | string string-md-format-name } ] [ level level ]

    An MD is created and the MD view is displayed.

    By default, an MD is at level 0. Level 0 is the lowest level.

    Only IEEE Standard 802.1ag-2007 supports format, no-md-name, dns dns-md-format-name, mac-address mac-md-format-name, and string string-md-format-name.

    To create multiple MDs, repeat step 2. Up to 64 MDs can be created on a device.

    NOTE:

    802.1ag packets from a lower-level MD are discarded when being transmitted through a higher-level MD, and 802.1ag packets sent to the MD of the same level are discarded or terminated. 802.1ag packets from a higher-level MD can be transmitted through a lower-level MD.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142090

Views: 83401

Downloads: 104

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next