No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to BFD

Introduction to BFD

Definition

BFD is a unified detection mechanism used to quickly detect link faults and monitor IP connectivity.

Purpose

To minimize the impact of device faults on services and improve network availability, a network device must be able to quickly detect faults in communication with adjacent devices. Measures can then be taken to promptly rectify the faults to ensure service continuity. In practice, hardware detection is used to detect link faults. For example, Synchronous Digital Hierarchy (SDH) alarms are used to report link faults. However, not all media can provide the hardware detection mechanism. Applications use the Hello mechanism of the upper-layer routing protocol to detect faults. The detection duration is more than 1 second, which is too long for some applications. On a Layer 3 network, the Hello packet detection mechanism cannot detect faults for all routes, such as static routes. This means that a fault between interconnected systems is difficult to locate.

BFD addresses these issues and provides fast fault detection independent of media and routing protocols. BFD is useful because it can:

  • Quickly detect link faults between neighboring network devices. The detected faults may occur on interfaces, data links, or forwarding engines.

  • Provide uniform detection for all media and protocol layers in real time.

Benefits

With BFD, you can improve network performance and adjacent systems can quickly detect communication faults so that a standby channel can be created immediately to restore communications and ensure network reliability.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142090

Views: 100378

Downloads: 113

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next