No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Procedure

  • Run the display bfd configuration { all | static [ name bfd-name ] | discriminator local-discr-value | dynamic | peer-ip ip-address [ vpn-instance vpn-instance-name ] } [ verbose ] command to view the BFD configurations.
  • Run the display bfd configuration { all | static | peer-ipv6 ipv6-address [ vpn-instance vpn-instance-name ] } [ verbose ] command to view the BFD6 configurations.
  • Run the display bfd interface [ interface-type interface-number ] command to check the BFD-enabled interface.
  • Run the display bfd session { all | static | discriminator discr-value | dynamic | peer-ip { default-ip | ip-address [ vpn-instance vpn-instance-name ] } | static-auto } [ verbose ] command to view information about the BFD session.
  • Run the display bfd session { all | static | peer-ipv6 ipv6-address [ vpn-instance vpn-instance-name ] } [ verbose ] command to view information about the BFD6 session.
  • Run the display bfd statistics command to view global BFD statistics.
  • Run the display bfd statistics session { all | static | dynamic | discriminator discr-value | peer-ip default-ip | peer-ip ip-address [ vpn-instance vpn-name ] | static-auto } command to view BFD session statistics.
  • Run the display bfd statistics session { all | static | peer-ipv6 ipv6-address [ vpn-instance vpn-instance-name ] } command to view BFD6 session statistics.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142090

Views: 94491

Downloads: 107

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next