No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the VRRP Running Status

Monitoring the VRRP Running Status

Context

During routine maintenance, you can run the following commands to view VRRP Advertisement packet statistics and monitor the VRRP running status.

Procedure

  • Run the display vrrp [ interface interface-type interface-number ] [ virtual-router-id ] statistics command in any view to view statistics about sent and received packets of a VRRP group.
  • Run the display vrrp6 [ interface interface-type interface-number ] [ vrid virtual-router-id ] statistics command in any view to view statistics about sent and received packets of a VRRP6 group.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142090

Views: 83036

Downloads: 104

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next