No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Does the Switch Process Received Flush Packets of Smart Link?

How Does the Switch Process Received Flush Packets of Smart Link?

After receiving Flush packets, the switch checks the password in the Flush packets. If the control VLAN and password in the Flush packets are the same as those configured on the interface, the system deletes only MAC address entries on the interface where the smart-link flush receive command is configured and the control VLAN specified in the command is the same as the control VLAN in the Flush packets. If the control VLAN and password in the Flush packets are different from those configured on the interface, the switch discards the Flush packets.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142090

Views: 94756

Downloads: 107

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next