No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Smart Link and Monitor Link Configuration

Smart Link and Monitor Link Configuration

This chapter describes how to configure Smart Link and Monitor Link. Smart Link is a link backup feature that provides a fast link switchover mechanism on dual-homed networks to improve reliability. Monitor Link is an interface association mechanism used to monitor the uplink interface state. If the state of the uplink interface switches between Up and Down, Monitor Link requests the associated downlink interfaces to switch their states. In this case, the topology protocol on the downstream device triggers an active/standby switchover.

Updated: 2019-08-21

Document ID: EDOC1000142090

Views: 101293

Downloads: 113

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next