No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration


  • Run either of the following commands to check the VRRP group status and parameters:

    • display vrrp [ interface interface-type interface-number ] [ virtual-router-id ] [ brief ]
    • display vrrp { interface interface-type interface-number [ virtual-router-id ] | virtual-router-id } verbose

  • Run the display vrrp protocol-information command to check VRRP information.
  • Run the display vrrp [ interface interface-type interface-number ] [ virtual-router-id ] statistics command to check statistics about sent and received packets of the VRRP group.
Updated: 2019-08-21

Document ID: EDOC1000142090

Views: 100419

Downloads: 113

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next