No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Levels of Reliability Requirements

Levels of Reliability Requirements

There are three requirement levels according to the objective of the implementation and the implementation itself. Table 1-1 lists three levels of reliability requirements.

Table 1-1  Levels of reliability requirements





Fewer faults in the system software and hardware

  • Hardware: simplified circuit design, improved production technique, and reliability test
  • Software: software reliability design and test


No impact on the system when a fault occurs

Device and link redundancy design, switchover policy, and switchover success rate


Rapid recovery from a fault that affects the system

Fault detection, diagnosis, isolation, and recovery

All three levels of reliability must be considered during different stages of building a network:

  • Level 1 when designing and producing network devices
  • Level 2 when designing network architectures
  • Level 3 when using reliability technologies during network deployment
Updated: 2019-08-21

Document ID: EDOC1000142090

Views: 95558

Downloads: 111

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next