No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Reliability

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Is the VRRP Status Negotiated When the Same Priority Is Set for Devices in the VRRP Group?

How Is the VRRP Status Negotiated When the Same Priority Is Set for Devices in the VRRP Group?

When devices in the VRRP group use the same priority:

  • If the VRRP master and slave are determined, the VRRP status is not negotiated again.

  • If two masters exist before devices in the VRRP group exchange heartbeat packets, the VRRP status is negotiated as follows:

    If the source IP address of a received heartbeat packet on the local end is larger than the primary IP address of the interface, the local device switches to the Backup state. Otherwise, the local end discards the heartbeat packet and retains in Master state.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142090

Views: 83709

Downloads: 104

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next