No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Configurations

Clearing Configurations

Context

Before re-configuring online parameters of APs in the AP provisioning view, clear existing configurations. The cleared configurations cannot be restored. Exercise caution when you run the following command.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    provision-ap

    The AP provisioning view is displayed.

  4. Run:

    clear configuration this

    All configurations are cleared in the AP provisioning view.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 122067

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next