No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for WLAN Security

Licensing Requirements and Limitations for WLAN Security

Involved Network Elements

AP
  • APs mentioned in this document are Huawei AP products. You are advised to use Huawei APs to connect to the AC.
  • You can run the display ap-type all command to check the default AP types supported by the device.
  • When central APs and RUs are used, ensure that their versions are the same. For example, if the central AP version is V200R007C10, the RU version must be V200R007C10.
Table 11-1  Mapping between switch versions and AP versions

Product Software Version

AP Software Version

V200R011C10

V200R008C10

V200R008C00

V200R007C20

V200R007C10

V200R006C20

V200R006C10

V200R010C00

V200R007C10

V200R006C20

V200R006C10

V200R009C00

V200R006C20

V200R006C10

V200R007C20

V200R006C10

V200R008C00

V200R005C30

V200R005C20

V200R005C10

V200R007C00

V200R005C20

V200R005C10

V200R006

V200R005C00

V200R005

V200R005C00

AAA server
  • Huawei servers such as the Policy Center and Agile Controller or third-party AAA servers perform authentication, accounting, and authorization on users.
Portal server
  • Huawei servers such as the Policy Center and Agile Controller or third-party Portal servers, receive authentication requests from Portal clients, provide free Portal services and a web authentication interface, and exchange authentication information of the authentication clients with access devices. This component is required only in Portal authentication mode.

Licensing Requirements

When an X series card is used as a WLAN AC, the number of online APs supported by the X series card is controlled by licenses. The X series card supports a maximum of 16 online APs. To increase the number of online APs supported by the card, apply for and purchase a license from the agent.
  • AP resource license-16AP for WLAN access controller
  • AP resource license-64AP for WLAN access controller
  • AP resource license-128AP for WLAN access controller
  • AP resource license-512AP for WLAN access controller

For details about how to apply for a license, see S Series Switch License Use Guide.

Version Requirements

Table 11-2  Products and minimum version supporting WLAN security
Product Minimum Version Required
S12708/S12712 V200R005

S12704

V200R008

S12710

V200R010

Feature Limitations

WIDS/WIPS
  • APs that have WDS or Mesh services configured cannot work in monitor mode.

  • If WIDS, spectrum analysis, background neighbor probing, or terminal location is enabled on a radio, the radio cannot be used to establish a WDS bridge or Mesh link.

  • V200R005C00, V200R006C00, V200R007C00, and V200R008C00: When an AP working in hybrid mode periodically scans channels, services may be interrupted for a short time. The AP can only take the countermeasures on the channel used by WLAN services. To take countermeasures on all channels, you need to configure the AP to work in monitor mode. However, WLAN services are unavailable in this mode.

  • V200R007C20, V200R009C00 V200R010C00 and V200R011C10: When an AP working in normal mode periodically scans channels, services may be interrupted for a short time. The AP working in normal mode can only take the countermeasures on the channel used by WLAN services. To take countermeasures on all channels, you need to configure the AP to work in monitor mode. However, WLAN services are unavailable in this mode.

  • V200R005C00, V200R006C00, V200R007C00, and V200R008C00: The configured WIDS or WIPS takes effect on an AP only after a service set is bound to the AP on the AC and the AC delivers the configurations to the AP.

  • If the number of STAs is larger than 3K, you are advised to disable the WIDS function. This function affects the AC performance and reduces CPU performance by about 10%.

Security Policy
  • The AP7030DE and AP9330DN do not support WAPI.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 150538

Downloads: 128

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next