No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Mesh Whitelist

Configuring a Mesh Whitelist

Context

To prevent a vehicle-mounted AP from connecting to trackside APs along a different track from the vehicle-mounted AP, add MAC addresses of all trackside APs along the local track to the Mesh whitelist of the vehicle-mounted AP.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    mesh-whitelist-profile name whitelist-name

    A Mesh whitelist profile is created, and the Mesh whitelist profile view is displayed.

    By default, no Mesh whitelist profile is available in the system.

  4. Run:

    peer-ap mac mac-address

    MAC addresses of neighboring APs that are allowed to connect to an AP are added to the Mesh whitelist profile.

    By default, no MAC address of a neighboring AP is added to a Mesh whitelist profile.

    NOTE:

    When configuring vehicle-ground fast link handover, add MAC addresses of trackside APs allowed to connect to a vehicle-mounted AP to a whitelist.

  5. Run:

    quit

    Return to the WLAN view.

  6. Run:

    quit

    Return to the system view.

  7. Run:

    interface wlan-radio wlan-radio-number

    The radio interface view is displayed.

  8. Run:

    mesh-whitelist-profile whitelist-name

    The Mesh whitelist profile is bound to the AP radio.

    By default, no Mesh whitelist profile is bound to an AP radio.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 121119

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next