No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring Vehicle-Ground Fast Link Handover

Monitoring Vehicle-Ground Fast Link Handover

Procedure

  • Run the display mesh vap { ap-group ap-group-name | ap-id ap-id [ radio radio-id ] | ap-name ap-name [ radio radio-id ] } [ mesh-id mesh-id ] command to check information about Mesh VAPs.
  • Run the display mesh vap { all | mesh-id mesh-id } command to check information about Mesh VAPs of a specified Mesh ID or all Mesh IDs.
  • Run the display wlan mesh link { all | ap-id ap-id [ radio radio-id ] | ap-name ap-name [ radio radio-id ] | mesh-profile profile-name }command to check information about Mesh links.
  • Run the display mesh-neighbor-rssi [ ap-name ap-name radio radio-id | ap-id ap-id radio radio-id ] [ max-neighbor-number max-number ] command to check RSSI information collected by an AP.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 120549

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next