No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WPA/WPA2

WPA/WPA2

WEP shared key authentication uses the RC4 symmetric stream cipher to encrypt data. This authentication method requires the same static key pre-configured on the server and client. Both the encryption mechanism and encryption algorithm can bring security risks to the network.

The Wi-Fi Alliance developed Wi-Fi Protected Access (WPA) to overcome the shortcomings of WEP before more secure policies were provided in 802.11i. WPA still uses the RC4 algorithm, but it uses an 802.1X authentication framework and supports Extensible Authentication Protocol-Protected Extensible Authentication Protocol (EAP-PEAP) and EAP-Transport Layer Security (EAP-TLS) authentication, and defines the Temporal Key Integrity Protocol (TKIP) encryption algorithm.

Later, 802.11i defined WPA2. WPA2 uses Counter Mode with CBC-MAC Protocol (CCMP), a more secure encryption algorithm than those used in WPA.

Both WPA and WPA2 support 802.1X authentication and the TKIP/CCMP encryption algorithms, ensuring better compatibility. The two protocols provide almost the same security level and their difference lies in the protocol packet format.

The WPA/WPA2 security policy involves four steps:
  1. Link authentication
  2. Access authentication
  3. Key negotiation
  4. Data encryption

Link Authentication

Link authentication can be completed in open system authentication or shared key authentication mode. WPA and WPA2 support only open system authentication.For details, see "Link Authentication" in STA Access.

Access Authentication

WPA and WPA2 have an enterprise edition and a personal edition.
  • The WPA/WPA2 enterprise edition (WPA/WPA2-802.1X authentication) uses a RADIUS server and the EAP protocol for authentication. Users provide authentication information, including the user name and password, and are authenticated by an authentication server (generally a RADIUS server).

    Large-scale enterprise networks usually use the WPA/WPA2 enterprise edition.

    NOTE:

    For details about 802.1X authentication, see Principles of 802.1X Authentication in the Configuration Guide - User Access and Authentication Configuration Guide.

    WPA/WPA2 implements 802.1X authentication using EAP-TLS and EAP-PEAP. Figure 12-1 and Figure 12-2 show the EAP-TLS 802.1X authentication and EAP-PEAP 802.1X authentication processes.

    Figure 12-1  EAP-TLS 802.1X authentication

    Figure 12-2  EAP-PEAP 802.1X authentication

  • WPA/WPA2 personal edition:

    A dedicated authentication server is expensive and difficult to maintain for small- and medium-scale enterprises and individual users. The WPA/WPA2 personal edition provides a simplified authentication mode: pre-shared key authentication (WPA/WPA2-PSK). This mode does not require a dedicated authentication server. Users only need to set a pre-shared key (PSK) on each WLAN node (including WLAN server, wireless router, and wireless network adapter).

    A WLAN client can access the WLAN if its pre-shared key is the same as that configured on the WLAN server. The PSK is not used for encryption; therefore, it does not pose security risks like the 802.11 shared key authentication.

802.1X authentication can be used to authenticate wireless and wired users, whereas PSK authentication is specific to wireless users.

PSK authentication requires that a STA and an AC be configured with the same PSK. The STA and AC authenticate each other through key negotiation. During key negotiation, the STA and AC use their PSKs to decrypt the message sent from each other. If the messages are successfully decrypted, the STA and AC have the same PSK. If they use the same PSK, PSK authentication is successful; otherwise, PSK authentication fails.

Key Negotiation

802.11i defines two key hierarchies: pairwise key hierarchy and group key hierarchy. The pairwise key hierarchy protects unicast data exchanged between STAs and APs. The group key hierarchy protects broadcast or multicast data exchanged between STAs and APs.

During key negotiation, a STA and an AC use the pairwise master key (PMK) to generate a pairwise transient key (PTK) and a group temporal key (GTK). The PTK is used to encrypt unicast packets, and the GTK is used to encrypt multicast and broadcast packets.

  • In 802.1X authentication, a PMK is generated in the process shown in Figure 12-1.

  • In PSK authentication, the method to generate a PMK varies according to the form of the PSK, which is configured using a command:
    • If the PSK is a hexadecimal numeral string, it is used as the PMK.
    • If the PSK is a character string, the PMK is calculated using a hash algorithm based on the PSK and service set identifier (SSID).

Key negotiation consists of unicast key negotiation and multicast key negotiation.

  • Unicast key negotiation

    Key negotiation is completed through a four-way handshake between a STA and an AC, during which the STA and AC send EAPOL-Key frames to exchange information, as shown in Figure 12-3.
    Figure 12-3  Unicast key negotiation

    The unicast key negotiation process consists of the following steps:

    1. The AC sends an EAPOL-Key frame with a random value (ANonce) to the STA.
    2. The STA calculates the PTK using its own MAC addresses and the MAC address of the AC, the PMK, ANonce, and SNonce, and sends an EAPOL-Key frame to the AC. The EAPOL-Key frame carries the SNonce, robust security network (RSN) information element, and message integrity code (MIC) of the EAPOL-Key frame. The AC calculates the PTK using the MAC addresses of its own and the STA, PMK, ANonce, and SNonce, and validates the MIC to determine whether STA's PMK is the same as its own PMK.
    3. The AC sends an EAPOL-Key frame to the STA to request the STA to install the PTK. The EAPOL-Key frame carries the ANonce, RSN information element, MIC, and encrypted GTK.
    4. The STA sends an EAPOL-Key frame to the AC to notify the AC that the PTK has been installed and will be used. The AC installs the PTK after receiving the EAPOL-Key frame.
  • Multicast key negotiation

    Multicast key negotiation is completed through a two-way handshake. The two-way handshake begins after the STA and AC generate and install a PTK through a four-way handshake. Figure 12-4 shows the two-way handshake process.
    Figure 12-4  Multicast key negotiation

    The multicast key negotiation process consists of the following steps:

    1. The AC calculates the GTK, uses the unicast key to encrypt the GTK, and sends an EAPOL-Key frame to the STA.
    2. After the STA receives the EAPOL-Key frame, it validates the MIC, decrypts the GTK, installs the GTK, and sends an EAPOL-Key ACK frame to the AC. After the AC receives the EAPOL-Key ACK frame, it validates the MIC and installs the GTK.

Data Encryption

WPA and WPA2 support the TKIP and CCMP encryption algorithms.

  • TKIP

    Unlike WEP, which uses a static shared key, TKIP uses a dynamic key negotiation and management mechanism. Each user obtains an independent key through dynamic negotiation. User keys are calculated using the PTK generated in key negotiation, the MAC address of the sender, and the packet sequence number.

    TKIP uses MICs to ensure the integrity of frames received on the receiver and validity of data sent by the sender and receiver. This mechanism protects information integrity. A MIC is calculated using the MIC key generated during key negotiation, the destination MAC address, source MAC address, and data frame.

  • CCMP

    While WEP and TKIP use a stream cipher algorithm, CCMP uses an Advanced Encryption Standard (AES) block cipher. The block cipher algorithm overcomes defects of the RC4 algorithm and provides a higher level of security.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 138078

Downloads: 123

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next