No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the USB Function on an AP

Configuring the USB Function on an AP

Context

When users need to save or transfer files using the USB interface provided on some APs, the USB function can be enabled using the usb enable command. When the USB function is enabled, the power consumption of the AP will increase, which may affect other functions. You are advised to run the undo usb enable command to disable the USB function after using it.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    ap-system-profile name profile-name

    An AP system profile is created, and the AP system profile view is displayed.

    By default, the system provides the AP system profile default.

  4. Run:

    usb enable

    The USB function on the AP is enabled.

    By default, the USB function on an AP is disabled.
    NOTE:

    The USB function is supported only by the R250D-E, AP2050DN, AP2050DN-E, AP4050DN-E, AP6050DN, AP6150DN, AP7050DE, and AP7050DN-E.

    Some AP functions may be affected after the USB function is enabled.
    • The 2.4 GHz radio on the AP6150DN, AP6050DN, AP7050DE, and AP7050DN-E supports only dual spatial streams at most.
    • The AP4050DN-E cannot provide PoE power supply.
    • The USB function does not take effect when the R250D-E, AP2050DN, and AP2050DN-E use the IEEE 802.3af PoE for power supply.

    The affected AP functions are restored after the USB function is disabled.

  5. Run:

    quit

    Return to the WLAN view.

  6. Bind an AP system profile to an AP group or AP.

    • Binding an AP system profile to an AP group.
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.

        By default, the AP system profile default is bound to an AP group.

    • Binding an AP system profile to an AP.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.

        By default, no AP system profile is bound to an AP.

  7. Run:

    quit

    Return to the WLAN view.

  8. Run:

    commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 147196

Downloads: 128

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next