No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for Dual-Link Cold Backup

Default Settings for Dual-Link Cold Backup

Table 22-3  Default settings for dual-link cold backup

Parameter

Default Setting

AC's global priority

0

AC priority based on APs

None

CAPWAP heartbeat interval

25 seconds

Number of CAPWAP heartbeat packet transmissions

3

Revertive switching in dual-link backup mode

Enabled

Dual-link backup

Disabled

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 119474

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next