No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the Configuration to an AP Group or a Specific AP

Applying the Configuration to an AP Group or a Specific AP

Context

WIDS services are implemented on APs, including WLAN device detection and containment, attacking device detection, and dynamic blacklist; therefore, the WIDS profile carrying the WIDS services must be applied to an AP group or a specific AP.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    vap-profile name profile-name

    A VAP profile is created.

    By default, the system provides the VAP profile default.

    NOTE:

    When a VAP profile exists in the system, you can use the existing one or create a new one.

  4. Run:

    quit

    Return to the WLAN view.

  5. Bind the VAP profile to radios of an AP group or a specific AP as required to make the radios properly work. For details, see Binding VAP Profiles.
  6. Run:

    quit

    Return to the WLAN view.

  7. Bind a WIDS profile to an AP group or a specific AP.

    • Binding a WIDS profile to an AP group.
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the wids-profile profile-name command to bind the WIDS profile to a radio in an AP group.

        By default, no WIDS profile is bound to an AP group.

    • Binding a WIDS profile to a specific AP.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the wids-profile profile-name command to bind the WIDS profile to a radio of a specific AP.

        By default, no WIDS profile is bound to a specific AP.

  8. Run:

    quit

    Return to the WLAN view.

  9. Run:

    commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 119917

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next