No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mesh Whitelist Profile

Mesh Whitelist Profile

Mesh whitelist profile: A Mesh whitelist profile contains MAC addresses of neighboring APs allowed to set up Mesh links with an AP. After a Mesh whitelist profile is applied to an AP radio, only APs with MAC addresses in the whitelist can access the AP, and other APs are denied. On common Mesh networks, a Mesh whitelist must be configured for a Mesh node.

NOTE:
  • A neighboring AP with the MAC address in the whitelist can set up a wireless virtual link with the local AP only after passing security authentication.
  • On a Mesh network where ATs are deployed, after FWA is enabled in a Mesh profile, you do not need to configure a Mesh whitelist for a Mesh node. All ATs are allowed to access the Mesh node.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 130920

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next