No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a WLAN Security Policy

Configuring a WLAN Security Policy

You can configure WLAN security policies to authenticate identities of wireless terminals and encrypt user packets, protecting the security of the WLAN and users. The supported WLAN security policies include open system authentication, WEP, WPA/WPA2-PSK, WPA/WPA2-802.1x, WAPI-PSK, and WAPI-certificate. You can configure one of them in a security profile. Open system authentication and WPA/WPA2-802.1x need to be configured together with NAC to manage user access.For details about NAC, see NAC Configuration (Unified Mode).

Pre-configuration Tasks

Before configuring security policy, perform the task of WLAN Service Configuration.


WLAN security policies are configured using profiles. Figure 12-10 shows the configuration flowchart.

Figure 12-10  WLAN security policy configuration flowchart

The configuration procedure is as follows:

Updated: 2019-12-31

Document ID: EDOC1000142094

Views: 188038

Downloads: 138

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next