No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Multicast CAC

Configuring Multicast CAC

Context

Multicast Call Admission Control (CAC) is a function that controls access of multicast users based on various rules to ensure multicast service availability. You can configure CAC based on multicast bandwidth or the number of multicast group memberships. These two CAC modes are independent of each other and can be used independently or together.

  • CAC based on multicast bandwidth

    If the multicast bandwidth is insufficient, new users are prevented from joining multicast groups.

  • CAC based on the number of multicast group memberships

    When the number of multicast group memberships reaches the maximum value, new users are prevented from joining multicast groups.

Pre-configuration Tasks

Before configuring multicast CAC, complete the following tasks:

Procedure

  • Configure CAC based on multicast bandwidth.
    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      wlan

      The WLAN view is displayed.

    3. Run:

      traffic-profile name profile-name

      A profile profile is created and the profile profile view is displayed.

      By default, the system provides the traffic profile default.

    4. Run:

      igmp-snooping max-bandwidth max-bandwidth

      The multicast bandwidth limit is configured for a VAP.

      By default, the maximum multicast bandwidth is not configured for a VAP.

    5. Run:

      quit

      Return to the WLAN view.

    6. Run:

      vap-profile name profile-name

      The VAP profile view is displayed.

    7. Run:

      traffic-profile profile-name

      The traffic profile is bound to the VAP profile.

      By default, the traffic profile default is bound to a VAP profile.

    8. Run:

      quit

      Return to the WLAN view.

    9. Run:

      ap-system-profile name profile-name

      An AP system profile is created and the AP system profile view is displayed.

      By default, the system provides the AP system profile default.

    10. Run:

      igmp-snooping group-bandwidth start-group-address start-group-address end-group-address end-group-address bandwidth bandwidth-value

      The global bandwidth limit is configured for an AP.

      By default, the bandwidth of global multicast groups is not configured on an AP.

      You can configure the bandwidth of multicast groups in an AP system profile according to the actual bandwidth of a multicast program. This configuration takes effect for the APs or AP groups to which this AP system profile is bound. When users request to order this multicast program, the AC collects statistics on the current multicast bandwidth of the VAP according to the bandwidth of global multicast groups configured for the AP, and compares the current bandwidth with the configured maximum bandwidth to determine whether to allow users to order this multicast program.

    11. Run:

      quit

      Return to the WLAN view.

    12. Bind the AP system profile to an AP group or an AP.

      • Bind the AP system profile to an AP group.

        1. Run the ap-group name group-name command to enter the AP group view.
        2. Run the ap-system-profile profile-name command to bind the AP system profile to an AP group.

          By default, the AP system profile default is bound to an AP group, but no AP system profile is bound to an AP.

      • Bind the AP system profile to an AP.

        1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
        2. Run the ap-system-profile profile-name command to bind the AP system profile to an AP.

          By default, the AP system profile default is bound to an AP group, but no AP system profile is bound to an AP.

    13. Run:

      quit

      Return to the WLAN view.

    14. Run:

      commit { all | ap-name ap-name | ap-id ap-id }

      The configuration is delivered to the AP.

  • Configure CAC based on the number of multicast group memberships.
    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      wlan

      The WLAN view is displayed.

    3. Run:

      traffic-profile name profile-name

      A profile profile is created and the profile profile view is displayed.

      By default, the system provides the traffic profile default.

    4. Run:

      igmp-snooping max-user max-user

      The maximum number of multicast group memberships is configured for a VAP.

      By default, the maximum number of multicast group memberships is not configured for a VAP.

    5. Run:

      quit

      Return to the WLAN view.

    6. Run:

      vap-profile name profile-name

      The VAP profile view is displayed.

    7. Run:

      traffic-profile profile-name

      The traffic profile is bound to the VAP profile.

      By default, the traffic profile default is bound to a VAP profile.

    8. Run:

      quit

      Return to the WLAN view.

    9. Run:

      commit { all | ap-name ap-name | ap-id ap-id }

      The configuration is delivered to the AP.

Verifying the Configuration

  • Run the display traffic-profile { all | name profile-name } command to check the multicast CAC configuration in the traffic profile.

  • Run the display ap-system-profile { all | name profile-name } command to check the global multicast bandwidth configuration on the AP in the AP system profile.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 119468

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next