No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring User Isolation on a VAP

Configuring User Isolation on a VAP

Context

In a traffic profile, user isolation prevents packets of users on a VAP from being forwarded to each other. That is, users on a VAP cannot communicate with each other after user isolation is enabled. This improves user communication security and enables the gateway to centrally forward user traffic, facilitating user management.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    traffic-profile name profile-name

    A traffic profile is created, and the traffic profile view is displayed.

    By default, the system provides the traffic profile default.

  4. Run:

    user-isolate l2

    The user isolation function is enabled.

    By default, user isolation is disabled in a traffic profile.

  5. Run:

    quit

    Return to the WLAN view.

  6. Run:

    vap-profile name profile-name

    The VAP profile view is displayed.

  7. Run:

    traffic-profile profile-name

    The traffic profile is bound to the VAP profile.

    By default, the traffic profile default is bound to a VAP profile.

  8. Run:

    quit

    Return to the WLAN view.

  9. Run:

    commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.

Verifying the Configuration

  • Run the display traffic-profile { all | name profile-name } command to check the user isolation configuration in a traffic profile.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 130919

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next