No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring AP Online Parameters(AP Provisioning View)

Configuring AP Online Parameters(AP Provisioning View)

You can configure AP online parameters on an AC, including the AP name, group to which an AP belongs, mode of obtaining an IP address, static IP address, gateway address, and AC IP address list. You do not need to log in to APs one by one to configure these parameters.

You can configure AP online parameters in either of the following views:
  • AP view
  • AP provisioning view

You are advised to configure AP online parameters for a large number of APs in the AP provisioning view or for a single AP in the AP view. In this case, configure AP online parameters in the AP provisioning view.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 130683

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next