No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring ACL-based Priority Remarking

Configuring ACL-based Priority Remarking

Context

By configuring ACL-based priority remarking, the device remarks the priorities of wireless packets matching ACL rules to provide differentiated services.

Pre-configuration Tasks

Before configuring ACL-based priority remarking, complete the following tasks:

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    traffic-profile name profile-name

    A traffic profile is created and the traffic profile view is displayed.

    By default, the system provides the traffic profile default.

  4. Run the traffic-remark { inbound | outbound } ipv4 acl { acl-number | name acl-name } { dot11e dot11e-value | dscp dscp-value } to configure ACL-based priority remarking in the traffic profile.

    By default, ACL-based priority re-marking is not configured in a traffic profile.

    The traffic-remark command can reference a numbered ACL rule that is not configured. You can configure the referenced ACL rule after running this command.

    You can configure priority re-marking based on one ACL only in one direction. To change the ACL referenced by the traffic-remark command, run the traffic-remark command to override the original configuration of ACL-based priority re-marking.

  5. Run:

    quit

    Return to the WLAN view.

  6. Run:

    vap-profile name profile-name

    The VAP profile view is displayed.

  7. Run:

    traffic-profile profile-name

    The traffic profile is bound to the VAP profile.

    By default, the traffic profile default is bound to a VAP profile.

  8. Run:

    quit

    Return to the WLAN view.

  9. Run:

    commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 121681

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next