No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Description

Network Description

The WLAN AC can be deployed on an X series interface card to centrally manage APs and provide Wi-Fi access services for users. The AC manages and controls APs through CAPWAP protocol packets. The X series interface card can process CAPWAP packets; therefore, packets from the APs must enter the switch through the X series interface card.

Figure 3-1  Connecting AP to an X series interface card

As shown in Figure 3-1, an AP connects to the AC through a PoE switch. The PoE switch directly connects to and supplies power for the AP. In the uplink direction, the PoE switch connects to the X series interface card, so packets from the AP are processed by the X series interface card before reaching the AC.

Updated: 2019-12-31

Document ID: EDOC1000142094

Views: 187488

Downloads: 135

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next