No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a WIDS Whitelist

(Optional) Configuring a WIDS Whitelist

Context

After the rogue device containment function is enabled, rogue APs can be detected and contained. However, there may be APs of other vendors or on other networks working in the existing signal coverage areas. If these APs are contained, their services will be affected. To prevent this situation, you can configure the WIDS whitelist profile to add these APs to a WIDS whitelist which includes an authorized MAC address list, OUI list, and SSID list. When a rogue AP is detected but the AP's MAC address is in the authorized MAC address list, the AP is considered an authorized AP. However, if the AP's MAC address is not in the authorized MAC address list, the AP's OUI and SSID must be both in the authorized OUI and SSID lists; otherwise, the AP is a rogue AP.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    wids-whitelist-profile name profile-name

    A WIDS whitelist profile is created and the WIDS whitelist profile view is displayed.

    By default, no WIDS whitelist profile exists in the system.

  4. Run:

    permit-ap { mac-address mac-address | oui oui | ssid ssid }

    A WIDS whitelist is configured.

    By default, no WIDS whitelist is configured.

  5. Run:

    quit

    Return to the WLAN view.

  6. Run:

    wids-profile name profile-name

    The WIDS profile view is displayed.

  7. Run:

    wids-whitelist-profile profile-name

    The WIDS whitelist profile is applied to the WIDS profile.

    By default, no WIDS whitelist profile is bound to a WIDS profile.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 131868

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next