No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Mesh Radio Parameters

Configuring Mesh Radio Parameters

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface wlan-radio wlan-radio-number

    The radio interface view is displayed.

  3. Run:

    channel { 20mhz | 40mhz-minus | 40mhz-plus | 80mhz | 160mhz } channel or channel 80+80mhz channel1 channel2

    The working bandwidth and channel are configured for a radio.

    By default, the working bandwidth of a radio is 20 MHz, and no working channel is configured for a radio.

    The vehicle-mounted and trackside APs must be configured with the same channel and bandwidth.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 121740

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next