No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the PoE Function

Enabling the PoE Function

Context

Before using an AP to provide power for PDs connected to its interfaces, ensure that the PoE function is enabled on the interfaces.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run the port-link-profile name profile-name command to create an AP wired port link profile and enter the profile view.

    By default, the system provides the AP wired port link profile default.

  4. Run the undo poe disable command to enable the PoE function on the AP's interfaces.

    By default, the PoE function is enabled on an AP's interface.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 136657

Downloads: 123

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next