No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a STA Blacklist Profile

Configuring a STA Blacklist Profile

Context

A STA blacklist profile contains MAC addresses of wireless terminals forbidden to connect to the WLAN. To forbid some STAs to connect to the WLAN, configure a STA blacklist profile and apply the STA blacklist profile to an AP system profile or a VAP profile.

The effective scope of the STA blacklist profile differs according to the profiles to which it is applied.
  • AP system profile: The STA blacklist profile takes effect based on the AP. APs using the AP system profile will use the STA blacklist profile. The STA blacklist profile takes effect on all STAs connected to the APs (all VAPs).
  • VAP profile: The STA blacklist profile takes effect based on the VAP. If the STA blacklist profile is applied to an AP, the STA blacklist profile applies only to STAs connected to the corresponding VAPs.

If the STA blacklist or whitelist profiles are configured in both an AP system profile and a VAP profile, a STA can connect to the WLAN only when it is permitted by both the configuration in the AP system profile and VAP profile.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    sta-blacklist-profile name profile-name

    A STA blacklist profile is created and the STA blacklist profile view is displayed.

    By default, no STA blacklist profile is created.

  4. Run:

    sta-mac mac-address

    The MAC address of a STA is added.

    You can configure a maximum of 13107 STA MAC addresses in a STA blacklist profile.

    By default, the MAC address of a STA is not added to the blacklist.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 138910

Downloads: 126

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next