No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Roaming Between APs in the Same Service VLAN

Configuring Roaming Between APs in the Same Service VLAN

If neighboring APs have the same service VLAN, configure roaming between the APs in the same service VLAN. After the configuration, services are not interrupted when an STA moves from an AP to another AP in the same service VLAN.

Pre-configuration Tasks

Before configuring roaming between APs in the same service VLAN, complete the following tasks:

  • Perform the task of WLAN Service Configuration.
  • Perform the following operations for each AP involved in roaming:
    • Associate the APs to the same AC.
    • Configure the same security policy.
    • Set the same SSID.
    • Configure the same service VLAN.

Procedure

You can perform the following operations in any sequence based on the site requirements:

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142094

Views: 121976

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next