No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for WLAN QoS

Default Settings for WLAN QoS

Table 10-6  Default settings for WLAN QoS

Parameter

Default Setting

WMM

Enabled

Whether STAs that do not support WMM are allowed to connect to a WMM-enabled AP

Yes

Priorities of AC queues

AC_VO (Voice) > AC_VI (Video) > AC_BE (Best Effort) > AC_BK (Background)

Traffic policing

Disabled

Mapping of the priority of 802.11 packets to the DSCP priority of tunnel packets when packets are sent from an AP to an AC

For the default mapping from the user priority of 802.11 packets to the DSCP priority of tunnel packets, see priority-map tunnel-upstream dot11e dscp.

For the default mapping from the user priority of 802.11 packets to the 802.1p priority of tunnel packets, see priority-map tunnel-upstream dot11e dot1p.

Mapping from the 802.3 packet priority to the 802.11 packet priority when packets are sent to an AP from upper-layer devices.

For the default mapping from the DSCP priority of 802.3 packets to the user priority of 802.11 packets, see priority-map downstream dscp.

For the default mapping from the 802.1p priority of 802.3 packets to the user priority of 802.11 packets, see priority-map downstream dot1p.

Airtime scheduling

Disabled

ACL-based packet filtering

Not configured

ACL-based priority remarking

Not configured

Lync packet priority

No priority is configured for Lync packets.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 137354

Downloads: 123

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next