No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking AP Neighbor Information

Checking AP Neighbor Information


You can view neighbor information on a specified AP radio to determine the AP location and neighbor relationship, helping locate rogue APs and plan the WLAN.


  1. Run the display ap lldp neighbor { { ap-name ap-name | ap-id ap-id } [ interface interface-type interface-number ] | brief } command to check LLDP neighbor information on an AP.
  2. Run the display ap neighbor { ap-name ap-name | ap-id ap-id } [ radio radio ] command to check information about neighbors of a radio.
  3. Run the display ap around-ssid-list { ap-name ap-name | ap-id ap-id } command to check SSIDs of an AP's neighbors.
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 138206

Downloads: 123

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next