No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - WLAN-AC

This document describes native AC (hereinafter referred to as WLAN AC) configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Country Codes

Configuring Country Codes

Context

A country code identifies the country to which AP radios belong. Different countries support different AP radio attributes, including the transmit power and supported channels. Correct country code configuration ensures that radio attributes of APs comply with laws and regulations of countries and regions to which the APs are delivered.

The country code is configured in a regulatory domain profile. Two configuration scenarios are available:
  • If the APs managed by an AC are located in the same country or region, you only need to configure one country code.
  • If the APs managed by an AC are located in different countries, you need to configure different country codes for the APs.
As shown in Figure 5-38, APs using regulatory domain profile 1 in country 1 and those using regulatory domain profile 2 in country 2 are all managed and controlled by the same AC. In this situation, you need to configure the country code of country 1 in regulatory domain profile 1 and that of country 2 in regulatory domain profile 2.
Figure 5-38  Multiple country codes
NOTE:
  • When configuring an AC for the first time, you must configure the correct country code. The country code must comply with local laws and regulations.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    regulatory-domain-profile name profile-name

    A regulatory domain profile is created, and the regulatory domain profile view is displayed.

    By default, the system provides the regulatory domain profile default.

  4. Run:

    country-code country-code

    A country code is configured.

    By default, the country code CN is configured.

    For details about country codes, see country-code.

    Modifying the country code in a regulatory domain profile will restart APs using the profile.

  5. Run:

    quit

    Return to the WLAN view.

  6. Bind the regulatory domain profile to an AP group or AP.

    • Binding the regulatory domain profile to an AP group
      1. Run the ap-group name group-name command to enter the AP group view.

      2. Run the regulatory-domain-profile profile-name command to bind the regulatory domain profile to the AP group.

        By default, the regulatory domain profile default is bound to an AP group.

    • Binding the regulatory domain profile to an AP
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the regulatory-domain-profile profile-name command to bind the regulatory domain profile to the AP.

        By default, no regulatory domain profile is bound to an AP.

  7. Run:

    quit

    Return to the WLAN view.

  8. Run:

    commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.

Verifying the Configuration

  • Run the display regulatory-domain-profile { all | name profile-name } command to check the country code configured in a regulatory domain profile.
  • Run the display references regulatory-domain-profile name profile-name command to check reference information about a regulatory domain profile.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142094

Views: 149288

Downloads: 128

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next