No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
msdpPeerTable

msdpPeerTable

This table lists information about MSDP peers and packet transmission between peers.

The index of the table is msdpPeerRemoteAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.3.92.1.1.5.1.1

msdpPeerRemoteAddress

IpAddress

Not-accessible

TThe address of the remote MSDP peer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.3

msdpPeerState

INTEGER

{

inactive(1),

listen(2),

connecting(3),

established(4),

disabled(5)

}

Read-only

The state of the MSDP TCP connection with this peer.

The values are as follows:
  • 1: inactive
  • 2: listen
  • 3: connecting
  • 4: established
  • 5: disabled

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.4

msdpPeerRPFFailures

Counter32

Read-only

The number of SA messages received from this peer that failed the Peer-RPF check.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.5

msdpPeerInSAs

Counter32

Read-only

The number of MSDP SA messages received on this connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.6

msdpPeerOutSAs

Counter32

Read-only

The number of MSDP SA messages transmitted on this connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.7

msdpPeerInSARequests

Counter32

Read-only

The number of MSDP SA-Request messages received on this connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.8

msdpPeerOutSARequests

Counter32

Read-only

The number of MSDP SA-Request messages transmitted on this connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.9

msdpPeerInSAResponses

Counter32

Read-only

The number of MSDP SA-Response messages received on this connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.10

msdpPeerOutSAResponses

Counter32

Read-only

The number of MSDP SA Response messages transmitted on this TCP connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.11

msdpPeerInControlMessages

Counter32

Read-only

The total number of MSDP messages, excluding encapsulated data packets, received on this TCP connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.12

msdpPeerOutControlMessages

Counter32

Read-only

The total number of MSDP messages, excluding encapsulated data packets, transmitted on this TCP connection.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.13

msdpPeerInDataPackets

Counter32

Read-only

The total number of encapsulated data packets received from this peer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.14

msdpPeerOutDataPackets

Counter32

Read-only

The total number of encapsulated data packets sent to this peer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.15

msdpPeerFsmEstablishedTransitions

Counter32

Read-only

The total number of times the MSDP FSM transitioned into the ESTABLISHED state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.16

msdpPeerFsmEstablishedTime

TimeStamp

Read-only

This timestamp is set to the value of sysUpTime when a peer transitions into or out of the ESTABLISHED state.

It is set to zero when the MSDP speaker is booted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.17

msdpPeerInMessageTime

TimeStamp

Read-only

The sysUpTime value when the last MSDP message was received from the peer.

It is set to zero when the MSDP speaker is booted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.18

msdpPeerLocalAddress

IpAddress

Read-create

The local IP address used for this entry's MSDP TCP connection.

Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code "Generic error" is returned.

1.3.6.1.3.92.1.1.5.1.20

msdpPeerConnectRetryInterval

Integer32 (1..65535)

Read-create

Time interval, in seconds, for the [ConnectRetry-period] for this peer.

The value ranges from 1 to 65535 seconds.

The default value is 30.

Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code "Generic error" is returned.

1.3.6.1.3.92.1.1.5.1.21

msdpPeerHoldTimeConfigured

Integer32 (0|3..65535)

Read-create

Time interval, in seconds, for the [HoldTime-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), the MSDP connection is never torn down due to the absence of messages from the peer.

The value ranges from 0 or 3 to 65535.

The default value is 75.

Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code "Generic error" is returned.

When you perform the Get operation on this object, 90 is returned.

1.3.6.1.3.92.1.1.5.1.22

msdpPeerKeepAliveConfigured

Integer32 (0|1..21845)

Read-create

Time interval, in seconds, for the [KeepAlive-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), no periodic KEEPALIVE messages are sent to the peer after the MSDP connection has been established.

The value ranges from 0 or 1 to 21845.

The default value is 60.

Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code "Generic error" is returned.

1.3.6.1.3.92.1.1.5.1.23

msdpPeerDataTtl

Integer32 (0..255)

Read-create

The minimum TTL a packet is required to have before it may be forwarded using SA encapsulation to this peer.

The value ranges from 0 to 255.

The default value is 1.

When you perform the Get operation on this object, 0 is returned.

1.3.6.1.3.92.1.1.5.1.24

msdpPeerProcessRequestsFrom

TruthValue

Read-create

This object indicates whether to process MSDP SA Request messages from this peer. If True(1), MSDP SA Request messages from this peer are processed and replied to (if appropriate) with SA Response messages. If False(2), MSDP SA Request messages from this peer are silently ignored. It defaults to False when msdpCacheLifetime is 0 and to True when msdpCacheLifetime is non-0.

The restriction is not made for a single SA message. After a random sa-request-policy is successfully configured, the value of False is returned; otherwise, the value of True is returned.

1.3.6.1.3.92.1.1.5.1.25

msdpPeerStatus

RowStatus

Read-create

The RowStatus object by which peers can be added and deleted.

Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code "Generic error" is returned.

When you perform the Get operation on this object, 1 is returned.

1.3.6.1.3.92.1.1.5.1.26

msdpPeerRemotePort

Integer32 (0..65535)

Read-only

The remote port for the TCP connection between the MSDP peers.

The value ranges from 0 to 65535.

The default value is 639.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.27

msdpPeerLocalPort

Integer32 (0..65535)

Read-only

The local port for the TCP connection between the MSDP peers.

The value ranges from 0 to 65535.

The default value is 639.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.29

msdpPeerEncapsulationType

INTEGER

{

none(0),

tcp(1)

}

Read-create

The encapsulation in use when encapsulating data in SA messages to this peer.

0: none, indicating that this peer does not encapsulate multicast data in SA messages.

1: tcp, indicating that this peer encapsulates multicast data in SA messages.

Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code "Generic error" is returned.

When you perform the Get operation on this object, 1 is returned.

1.3.6.1.3.92.1.1.5.1.30

msdpPeerConnectionAttempts

Counter32

Read-only

The number of times the state machine has transitioned from INACTIVE to CONNECTING.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.31

msdpPeerInNotifications

Counter32

Read-only

The number of MSDP Notification messages received from this peer.

Currently, the return value 0 is supported only.

1.3.6.1.3.92.1.1.5.1.32

msdpPeerOutNotifications

Counter32

Read-only

The number of MSDP Notification messages transmitted to this peer.

Currently, the return value 0 is supported only.

1.3.6.1.3.92.1.1.5.1.33

msdpPeerLastError

OCTET STRING (SIZE (2))

Read-only

The last error code and subcode received via Notification from this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two-byte OCTET STRING contains the O-bit and error code, and the second byte contains the subcode.

The default value is 0000.

Currently, the return value 00 is supported only.

1.3.6.1.3.92.1.1.5.1.34

msdpPeerDiscontinuityTime

TimeStamp

Read-only

The value of sysUpTime on the most recent occasion at which one or more of this entry's counters suffered a discontinuity. See the DESCRIPTION of each object to see it is expected to have discontinuities. These discontinuities may occur at peer connection establishment.

Currently, the return value 0 is supported only.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table can be read without restriction.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read only when MSDP is enabled and MSDP peer relationship is established.

The value of msdpPeerProcessRequestsFrom defined in the MIB can be True or False. If True, MSDP SA Request messages from this peer are processed. If False, MSDP SA Request messages from this peer are silently ignored. In the command line, you can also configure the device to process the MSDP SA Request messages from parts of the group. In this occasion, the value False is returned when the table in this MIB is read.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 175650

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next