No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pingProbeHistoryTable

pingProbeHistoryTable

This table is used to save the historical records of the HWPing service tests. The index of the pingCtlTable and the index of another gradually increasing object act together as the index of this table.

The indexes of this table are pingCtlOwnerIndex, pingCtlTestName, and pingProbeHistoryIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.80.1.4.1.1

pingProbeHistoryIndex

Unsigned32 (1..'ffffffff'h)

Not-accessible

An entry in this table is created when the result of a ping probe is determined. The initial 2 instance identifier index values identify the pingCtlEntry that a probe result (pingProbeHistoryEntry) belongs to.

An implementation MUST start assigning pingProbeHistoryIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.80.1.4.1.2

pingProbeHistoryResponse

Unsigned32

Read-only

The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.80.1.4.1.3

pingProbeHistoryStatus

OperationResponseStatus

Read-only

The result of a particular probe done by a remote host.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.80.1.4.1.4

pingProbeHistoryLastRC

Integer32

Read-only

The last implementation-method-specific reply code received. If the ICMP Echo capability is being used, then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP codes are maintained by IANA. Standardized ICMP codes are listed at http://www.iana.org/assignments/icmp-parameters. The ICMPv6 codes are listed at http://www.iana.org/assignments/icmpv6-parameters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.80.1.4.1.5

pingProbeHistoryTime

DateAndTime

Read-only

Timestamp recorded when this probe result was determined.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be set. Test the auto created historical record row in the pingCtlTable.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted. When a row of the pingCtlTabl is deleted, the system would delete the corresponding test historical record automatically.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 174374

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next