No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwMplsFecListTable

hwMplsFecListTable

This table is used to configure or delete MPLS FEC nodes.

The indexes of this table are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface and hwMplsFecNodeNextHop.

OID

Object Name

Syntax

Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.182.1.50.1.2

hwMplsFecNodeIpAddress

IpAddress

Not-accessible

This object indicates the IP address of the specified FEC node.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.50.1.3

hwMplsFecNodeInterface

Unsigned32

Not-accessible

This object indicates the outgoing interface of the FEC node. You can acquire the correct interface index based on ifIndex of ifTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.50.1.4

hwMplsFecNodeNextHop

IpAddress

Not-accessible

This object indicates the next hop of the FEC node.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.50.1.51

hwMplsFecListRowStatus

RowStatus

Read-create

This object indicates whether one entry of FEC list table is created or destroyed. The value of the object can be CreatAndGo or Destroy. If the value is set as CreatAndGo, and the entry is created in hwFecListTable, the status of the object is changed into active.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can configure an FEC node only after the FEC list name is configured.

Modification Restriction

The entries in this table can only be added or deleted rather than modified.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 180648

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next