No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwL2VlanProtocolVlanNewTable

hwL2VlanProtocolVlanNewTable

This table is used to configure the protocol-based VLANs.

The indexes of this table are hwL2VlanProtocolVlanNewVlanId and hwL2VlanProtocolVlanNewProtocolIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.1

hwL2VlanProtocolVlanNewVlanId

VlanId

Not-accessible

This object specifies the VLAN ID set in the system view.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.2

hwL2VlanProtocolVlanNewProtocolIndex

Integer32(0..15)

Not-accessible

This object identifies the index of the protocol-based VLAN.

The value ranges from 0 to 15.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.3

hwL2VlanProtocolVlanNewProtocolType

INTEGER

{

at(1),

ipv4(2),

ipv6(3),

ipxEthernetii(4),

ipxLlc(5),

ipxRaw(6),

ipxSnap(7),

modeEthernetii(8),

modeLlc(9),

modeSnap(10)

}

Read-create

This object indicates the protocol type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.4

hwL2VlanProtocolVlanNewProtocolTypeValue

OCTET STRING (SIZE(2))

Read-create

The value of the configured protocol type.

The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follows.

  • ProtocolType: ipv4
    • ProtocolSubType: notused
    • ProtocolTypeValue: Zero length string
  • ProtocolType: ipv6
    • ProtocolSubType: notused
    • ProtocolTypeValue: Zero length string
  • ProtocolType: at
    • ProtocolSubType: notused
    • ProtocolTypeValue: Zero length string
  • ProtocolType: ipx
    • ProtocolSubType:
      • ethernetii
      • llc
      • raw
      • snap
    • ProtocolTypeValue: Zero length string
  • ProtocolType: mode-ethernetii
    • ProtocolSubType: etype
    • ProtocolTypeValue: hex string like '600', which means 0x0600. The range is [0x600..0xffff].
  • ProtocolType: mode-llc
    • ProtocolSubType: etype
    • ProtocolTypeValue: the sequence of different parts is as follows: [dsap value;ssap value]. Both range is [0x00..0xff]. For example, if the values of dsap and ssap are 0x09 and 0x0a, the value is '090a'.
  • ProtocolType: mode-snap
    • ProtocolSubType: etype
    • ProtocolTypeValue: hex string like '600', which means 0x0600. The range is [0x600..0xffff].

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.5

hwL2VlanProtocolVlanNewRowStatus

RowStatus

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries can be created in this table.

Protocol-based VLANs are divided based on the protocols in packets. After receiving untagged packets through an interface, a device determines the VLANs to which the packets belong according to their protocols before sending them to corresponding VLANs. This feature is used to send the packets of specified protocols within the specified VLAN.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restraint.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000142096

Views: 160464

Downloads: 77

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next