No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S12700 V200R010C00

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwLdtPortConfigTable

hwLdtPortConfigTable

This is an LDT port configuration table.

The index of this table is hwLdtInterfaceIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.174.1.1.5.1.1

hwLdtInterfaceIndex

InterfaceIndex

Not-accessible

This object specifies the interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.174.1.1.5.1.2

hwLdtInterfaceName

OCTET STRING

Read-only

This object specifies the name of an interface. The maximum length must be less than or equal to 48 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.174.1.1.5.1.3

hwLdtPortLdtEnable

EnabledStatus

Read-write

This object specifies whether the LDT is enabled on a port. This object has the following values:

  • 1: enabled
  • 2: disabled

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.174.1.1.5.1.4

hwLdtPortMode

INTEGER

Read-write

This object specifies the processing mode of a port. This object has the following values:

  • 1: trap
  • 2: blocking
  • 3: nolearning (learning a MAC address is forbidden)
  • 4: shutdown
  • 5: quitvlan (port exits the loop VLAN)

The default value is "4", shutdown.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.174.1.1.5.1.5

hwLdtPortStatus

INTEGER

Read-only

This object indicates the status of a port. This object has the following values:

  • 1: normal
  • 2: blocking
  • 3: nolearning (learning a MAC address is forbidden)
  • 4: shutdown
  • 5: quitvlan (port exits the loop VLAN)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.174.1.1.5.1.6

hwLdtPortRecoveryTime

Integer32

Read-write

This object indicates the automatic recovery delay. The value ranges from 0 to 255, in seconds.

The default value is 255s.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table can be created without restriction.

Modification Restriction

When the automatic recovery delay is 0, the default value (255s) is used.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

Loop detection must be enabled on the interface.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142096

Views: 170411

Downloads: 80

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next